Filed Under (Uncategorized) by auhow on 12-04-2012
1. Remove the headliner, for regular and supercab vehicles. Lower and position the headliner forward, for supercrew vehicles. For additional information, refer to interior trim and ornamentation . 2. Remove the rear trim panel pin-type retainers. 3. Remove the rear trim panel. 4. Remove the rear corner trim. For supercab vehicles, remove the b-pillar trim panel. For supercrew vehicles, remove the c-pillar trim panel. For additional information, refer to interior trim and ornamentation . Power sliding rear window 5. Remove the lh cable first, then the rh side cable. Press and hold the transition block away from the centerline of the vehicle. 6. Clamp and hold the cable near the transition block.