download
Removal and installation note: 1. Remove the exterior mirror mounting hole cover. 2. If equipped, remove the window regulator handle. Position the window regulator handle cover aside. Remove the window regulator handle screw and regulator handle. 3. If equipped, remove the window control switch plate. Disconnect the window control switch electrical connectors and if equipped, the memory set switch electrical connector. 4. If equipped, remove the front door trim panel reflector or the courtesy lamp lens. 5. Remove the screws. 6. Lift and remove the front door trim panel. 7. If equipped, twist the courtesy lamp connector one half turn and remove it from the front door trim panel. 8. To install, reverse the removal procedure.

download
Rear door trim panel removal all vehicles 1. Remove the door pull handle cover by inserting and twisting a suitable tool into the hole provided. 2. Remove the screws. 3. Remove the door latch release handle bezel. 1. Remove the cover and screw. 2. Lift the bezel to release. 3. Remove the bezel. Vehicles with power windows 4. Remove the door latch release handle bezel. Vehicles with manual windows 5. Remove window regulator handle. All vehicles 6. Remove the trim panel screws. 7. Remove the trim panel. 1. Rotate the trim panel upwards. 2. Remove the trim panel. Installation 1. To install, reverse the removal procedure.

download
Removal 1. Remove the front door trim panel. 2. Position the watershield aside. 3. Remove the rear glass channel bolt and position the glass channel aside. 4. Disconnect the rods from the door latch. 1. Disconnect the lock cylinder rod. 2. Unclip the locking clip. 3. Disconnect the door lock rod. 5. Position the front door latch aside. 1. Remove and discard the screws. 2. Position the latch aside. 6. Disconnect the electrical connectors. 7. Remove the latch. 1. Disconnect the cable from the latch. Installation 1. To install, reverse the removal procedure. 1. If necessary, use multi-purpose grease spray f5az-19g209-aa or equivalent meeting ford specification esr-m1c159-a to lubricate the latches. Note: install the front door latch screw in the small opening first, followed by the large opening.

download
Removal 1. Remove outside rear view mirror remote control unit. 2. Remove window regulator control switch housing by gently prying up, starting at the front. 3. Disconnect all connectors from window regulator control switch housing. 4. Remove inside door handle cup by gently prying at screwdriver slot with a screwdriver. 5. Remove screw directly beneath inside door handle. 6. Remove lower self-tapping screw retaining front door trim panel to door inner panel. 7. Remove rectangular plug in trim panel upper front extension and depress finger bracket with screwdriver. 8. Lift front door trim panel upward and snap out trim panel. 9. Disconnect wire harnesses from door panel as required and remove front door trim panel. Installation 1. Connect wire harnesses to front door trim panel as required. 2. Install front door trim panel by pushing in and down until it snaps into place. 3. Install all self-tapping screws retaining front door trim panel to door inner panel. 4. Install inside door handle cup. 5. Install window regulator control switch housing. 6. Install outside rearview mirror remote control unit.

download
Rear door trim panel removal all vehicles 1. Remove the door pull handle cover by inserting and twisting a suitable tool into the hole provided. 2. Remove the screws. 3. Remove the door latch release handle bezel. 1. Remove the cover and screw. 2. Lift the bezel to release. 3. Remove the bezel. Vehicles with power windows 4. Remove the door latch release handle bezel. Vehicles with manual windows 5. Remove window regulator handle. All vehicles 6. Remove the trim panel screws. 7. Remove the trim panel. 1. Rotate the trim panel upwards. 2. Remove the trim panel. Installation 1. To install, reverse the removal procedure.